The Cyclone filter's unique design provides an unsurpassed combination of rapid response, minimum dead volume and high filtration efficiency. Using the proven bypass design, a large sample flow is brought to the filter so the sample transport lag time is minimized. Only that portion of the sample needed for the process analyzer passes through the filter element. In this manner, low filtration rates and rapid responses are achieved. Careful flow design causes the unfiltered portion of the sample to sweep the filter element's surface to greatly extend the element's life.
Standard Features:
Material of construction is 316 Stainless Steel
Available in Monel, Hastelloy, or Titanium
Filter element material is a Teflon® membrane
O-Ring seal material is available in either Teflon® or Viton®
Available filter element porosities are 0.2, 1.0, 5.0 and 10 microns
See below for Maximum Temperature and Operating Inlet Pressures
Minimum flow rate on filtered side is 100 cc/min of vapor or 50 ml/min of liquid
Minimum flow rate on bypass side should be about 10 times the sample flow rate
Single Element
Dual Element
Effective filter areas:
1.78 sq. in
(11.3 sq. cm)
3.56 sq. in
(22.6 sq. cm)
Filtered side internal volume:
0.45 cu. in
(6.80 cu. cm)
0.90 cu. in
(13.6 cu. cm)
Bypass side internal volume:
1.56 cu. in
(25.3 cu. cm)
1.80 cu. in
(30.0 cu. cm)
Weight:
2.5 lbs
(1.13 kg)
3.2 lbs
(1.45 kg)
Cyclone Maximum Temperature
& Operating Inlet Pressures
