BP-60 Series
Back Pressure Control Regulators

GO Regulator BP-60 Series Back Pressure Regulators

The BP-60 Series, counterpart to the PR-50 Series pressure reducing regulator, is designed for systems that are higher in pressure and have low to moderate flows. This regulator has a diaphragm for maximum sensitivity to provide relief at high pressures. Good sensitivity and a wide selection of control ranges make this regulator an excellent selection in many research and pilot plant facilities.

  • Gas or liquid service
  • 316L stainless steel or Brass (alloy 360) construction
  • Electropolished body (316L) with better than 25 Ra finish in diaphragm cavity
  • Bubble tight shutoff
  • Viton® seals (other elastomers optional)
  • Adjustable control ranges are 500, 1000, and 2000 psig
  • Proof pressure is 2 times maximum working pressure
  • Burst pressure is 4 times maximum working pressure
  • Weight: 4.4 lbs (2.0 kg)
  • Mounting style is in line or panel (see Outline and mounting dimensions)

Maximum Temperature & Control Pressures

Nylon Diaphragm Backing
Seat Material Maximum Temperature   Maximum Control Range
Tefzel® 175° F (80° C) @ 1000 psig (13.76 MPa)
Teflon® 175° F (80° C) @ 1000 psig (13.76 MPa)
CF Teflon® 175° F (80° C) @ 1000 psig (13.76 MPa)
Polyimide 175° F (80° C) @ 2000 psig (13.76 MPa)
PEEK 175° F (80° C) @ 2000 psig (13.76 MPa)

 

Teflon® Diaphragm Backing
Seat Material Maximum Temperature   Maximum Control Range
Tefzel® 175° F (80° C) @ 1000 psig (13.76 MPa)
Teflon® 175° F (80° C) @ 1000 psig (13.76 MPa)
CF Teflon® 175° F (80° C) @ 1000 psig (13.76 MPa)
Polyimide 350° F (176° C) @ 2000 psig (13.76 MPa)
PEEK 350° F (176° C) @ 2000 psig (13.76 MPa)


For more information on our products.

Any problems with this web page should be sent to



Distributor Only Area
 
Home  •  News  •  Contacts  •  Distributors  •  Site Map

advanced